|
|
This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X12TC.For stationary machines 12000 RPM recommended speed.DimensionsDiameter82.7 mmCutting Length 19 mmBearing...
|
|
GBP71.95
More Information
|
|
|
Side profile for an attractive handrail. Can be used in conjunction with four different cutters to produce different handrail tops.DimensionsDiameter32 mmCutting Length 38 mmBearing Diameter 16 mmCutting Radius 1 9.5 ...
|
|
GBP51.95
More Information
|
|
|
Edge moulding only.DimensionsDiameter 20mmCutting Length 20mmBearing Diameter 16mmCutting Radius 2mmShank Diameter 12 inchPlease note that prices in the Trend Catalogue download, if shown below, may differ t...
|
|
GBP60.95
More Information
|
|
|
Edge moulding only.Supplied with one bearing.DimensionsDiameter 22mmCutting Length 25mmBearing Diameter 16mmCutting Radius 3mmShank Diameter 12 inchPlease note that prices in the Trend Catalogue download...
|
|
GBP57.95
More Information
|
|
|
Self guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings.DimensionsDiameter 28.5mmCutting Length 12.7mmBearing Diameter 9.5mm 12.7mmCutting Radius...
|
|
GBP47.95
More Information
|
|
|
Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings.DimensionsDiameter 25.4mmCutting Length 15.9mmBearing Diameter 9.5 12.7mmCutting Radius 4mm
|
|
GBP47.95
More Information
|
|
|
Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings.DimensionsDiameter 25.4mmCutting Length 16mmBearing Diameter 9.5mm 12.7mmCutting Radius 1...
|
|
GBP47.95
More Information
|
|
|
Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings.DimensionsDiameter 34.9mmCutting Length 20mmBearing Diameter 9.5mm 12.7mmCutting Radius ...
|
|
GBP51.95
More Information
|
|
|
Self guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings.For stationary machines 18000RPM recommended speed.DimensionsDiameter 63mmCutting Length 20mm
|
|
GBP85.95
More Information
|
|
|
For use in a router table only.Take 5 6 passes at repeated depths.For stationary machines max. 16000 RPM recommended speed.DimensionsDiameter 67mmCutting Length 16mmBearing Diameter 12.7mmCutting Radius 17.5mm
|
|
GBP55.95
More Information
|
