|
|
Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings.DimensionsDiameter 38mmCutting Length 16mmBearing Diameter 12.7mm 16mmCutting R...
|
|
GBP51.95
More Information
|
|
|
Self guiding cutter with facility to change profile by fitting large bearing varying the depth. Supplied with two bearings.For stationary machines 18000 RPM recommended speed.DimensionsDiameter 51mmCutting Length 24mm
|
|
GBP81.95
More Information
|
|
|
Shank mounted bearing follows template mounted on board surface.It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Complete with one bearing.DimensionsDiameter35 mmCutting Radius 6.3...
|
|
GBP40.95
More Information
|
|
|
This cutter Ref. PSC3X12TC are available as a set Ref. PDS3X12TC. For stationary machines or portable routers mounted in a table at 16000 RPM recommended speed.DimensionsDiameter 63.5mmCutting Length 12.7mmBearing Dia...
|
|
GBP95.95
More Information
|
|
|
The bearing eases setting up enables curved edges to be profiled.DimensionsDiameter 22mmCutting Length 16mmBearing Diameter 16mmCutting Radius 10mmShank Diameter 14 inchPlease note that prices in the Trend...
|
|
GBP61.95
More Information
|
|
|
By making a second pass at 90 degrees a full corner bead can be cut.DimensionsDiameter 23mmDiameter 20mmBearing Diameter 16mmCutting Radius 2mmShank Diameter 14 inchPlease note that prices in the Trend Catal...
|
|
GBP45.95
More Information
|
|
|
By making a second pass at 90 degrees a full corner bead can be cut.DimensionsDiameter 22mmDiameter 18.9mmBearing Diameter 12.7mmCutting Radius 3.2mmShank Diameter 14 inchPlease note that prices in the Trend...
|
|
GBP45.95
More Information
|
|
|
By making a second pass at 90 degrees a full corner bead can be cut.DimensionsDiameter 28mmDiameter 25.7mmBearing Diameter 16mmCutting Radius 4.8mmShank Diameter 14 inchPlease note that prices in the Trend C...
|
|
GBP55.95
More Information
|
|
|
By making a second pass at 90 degrees a full corner bead can be cut.DimensionsDiameter 28mmDiameter 25.7mmBearing Diameter 16mmCutting Radius 4.8mmShank Diameter 12 inchPlease note that prices in the Trend C...
|
|
GBP55.95
More Information
|
|
|
Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.DimensionsDiameter31.9 mmCutting Radius 1 7 mmShank Diameter 14 inchPlease note that prices in the Trend Catalogue d...
|
|
GBP35.95
More Information
|
