|
|
A 21.5mm solvent weld overflow system in uPVC. No expansion gap required on the solvent weld overflow system. Apply solvent cement evenly to both surfaces of joint, insert pipe fully in the socket depth and remove surplus cement with a cloth. Allow f
|
|
GBP3.09
More Information
|
|
|
High temperature double nozzle trap with compression type outlets for enabling the connection of two appliances. 76mm seal. For plastic pipes BS 5254, BS5255, BS EN 1455 and BS EN 1451. For copper pipes BS 659 and BS 2871. BS EN 274.
|
|
GBP6.14
More Information
|
|
|
110mm. Accepts 65mm square and 68mm round downpipe. External rainwater downpipes can be connected directly to a surface water drain or, depending on the design, via a gully trap to the underground drainage system.
|
|
GBP7.09
More Information
|
|
|
A 21.5mm solvent weld overflow system in uPVC. No expansion gap required on the solvent weld overflow system. Fix pipe clips at maximum 1.2m centres for vertical and 0.5m centres for horizontal runs.
|
|
GBP2.04
More Information
|
|
|
30m 10 x 3m. A lightweight yet strong and cost effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twel
|
|
GBP33.10
More Information
|
|
|
30m 10 x 3m. A lightweight yet strong and cost effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twel
|
|
GBP39.40
More Information
|
|
|
30m 10 x 3m. A lightweight yet strong and cost effective option. Apply solvent cement evenly to both surfaces of joint, insert pipe fully into the socket depth and remove surplus cement with a cloth. Allow five minutes to set before handling and twel
|
|
GBP39.40
More Information
|
|
|
Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic and copper pipes. No solvent welding required. It is recommended that externally installed polypropylene waste systems are pro
|
|
GBP1.64
More Information
|
|
|
0 90° adjustable Waste Bend, suitable for use with polypropylene, ABS, uPVC and copper pipes. No solvent welding required. It is recommended that externally installed polypropylene waste systems are protected against prolonged exposure to sunlight w
|
|
GBP4.09
More Information
|
|
|
Made from polypropylene, this quick and easy to install waste system incorporates a compression outlet that accepts plastic pipes to BS 5254 and BS 5255 and copper pipes to BS 659 and BS 2871. No solvent welding required. It is recommended that exter
|
|
GBP1.84
More Information
|
